Eagler's Nest

Airframes => Single Seaters => Topic started by: jrbirdman47 on February 04, 2020, 05:18:37 PM

Title: Wing strut/ Gear Brackets
Post by: jrbirdman47 on February 04, 2020, 05:18:37 PM

Try as I might I can find no detailed drawing of the wing strut/ landing gear brackets.

There is a drawing on page 22 which shows it exists, but no dimensions, etc.

Am I missing a page or what?

Title: Re: Wing strut/ Gear Brackets
Post by: Kamcoman77 on February 04, 2020, 07:18:40 PM

If you are building an XL, the fittings are full-size with dimensions on Page 26. There is also a drawing available from Iron Designs. Look at the bottom of the page in this link https://irondesigniowa.com/product-category/helpful-pdf-files-for-free-down-loading-for-your-xl-aircraft-building/

Title: Re: Wing strut/ Gear Brackets
Post by: jrbirdman47 on February 05, 2020, 04:43:26 AM

Ok, that explains it. I don't have a page 26. There is 25, then the Black Max pics on 27, but no 26.

Thanks for the link! More info there than I knew existed!

Eagle On!

Rick

Title: Re: Wing strut/ Gear Brackets
Post by: kalazzerx on February 05, 2020, 08:19:20 AM

I just exported my Fusion 360 drawings also and added them to a subfolder of the share - https://cloud.virtualmakerspace.com/s/6CiNKpPpFpWorwA?path=%2FStrut%20and%20landing%20gear%20fittings (https://cloud.virtualmakerspace.com/s/6CiNKpPpFpWorwA?path=%2FStrut and landing gear fittings)

I believe I originally got these from Yahoo forum but look about the same as what is provided by irondesign

Title: Re: Wing strut/ Gear Brackets
Post by: jrbirdman47 on February 05, 2020, 02:16:03 PM

Got 'em!   Thanks for the help, guys!