Gussets for trailing edge

[airman]

What size are the gussets for the trailing edge?  Also is 1/8 in plywood used.   thanks steve

[Bob S.]

I used 1.25 x 1.25 x .8mm ply on mine..
Same as shown on WING sheet #37 of the LEXL Plans

[airman]

Thanks Bob my DE plans show nothing on the gusset size.

[ParQld]

I used .8mm ply on mine about the same size gussets as Bob (Mine is a DE)

cheers Paul

[scottiniowa]

Though the boss has not stepped in on this, I think it would be safe to say, that if a gusset was required to be 4 times thicker (1/8") than the standard .8mm gusset, it WOULD then be called out. With it not, it would seem the past builders have this correct. ( .8mm)

[MrG]

Im still alive with 46 hrs and i'm with you guys 
mine were a tad bigger but i did use .8, tested to day with a crappy eastly which gives us the best washing machine/roller coaster day for flying 
every thing attached stilled, mental note - winds from 090, good day to consume alcohol.  
some images 1/2 way thought this album
https://goo.gl/photos/wsKzDQBZyrPAkU4SA