I'm sure this is a stupid question, first time builder here and I'm not seeing specifics on page 2. I'm building the vertical stab. I decided to go with 1/2" 4130 for the leading edge and adding a couple more ribs. Question, does the top of the 1/2" leading edge tube get positioned above the 3/4" aluminum hinge tube or should I fish mouth the 1/2" tube a little and position it against the 3/4" aluminum vertical tube? I'm assuming I should use which ever way for the rudder and the horizontal stab/elevator as well.
Also, if anyone has anything else to add in regards to the construction of the tail feathers before I rivet it all together, please offer suggestions. Thanks! Pete