How to post, how to add pics, how to add an attachment, and how to share a YouTube video...


Author Topic: New Machine Shop  (Read 4336 times)

Offline High Noon

  • Jr. Member
  • **
  • Posts: 15
  • Total likes: 1
  • Flying Cabin Eagle
  • Eagle Type: Cabin Eagle
New Machine Shop
« on: January 02, 2014, 07:39:34 AM »
Hey Geezers,

I been a way for a while...... New group is kinda scary.
Actually, I bought myself a Mill, and a lathe. Should make future building nicer. Wish I had this stuff when I was building 713HG.

Anyhow, If any of you boys want something chucked up on a lathe, or clamped in a mill and cut, Let me know. 
Be glad to help.

Also an update on my plane:

Turns out that when the engine died on climb out it was because of a voltage regulator failure. 
I had 24 Volts pulsing thru my 12V Ignition, which fried my points.

It also fried my timing light........Which is how I discovered that particular problem........
Havnt got it fixed yet.

High Noon
SHANE

Offline Dan_

Re: New Machine Shop
« Reply #1 on: January 02, 2014, 07:48:31 AM »
Scary..?  Hell no, it's us... your Geezer friends.  We just fired Yahoo is all.  Went uptown.  Mainstream.  Prime-time.

Same guys, just left the Ghetto...

Welcome back.


If there are no dogs in Heaven, then when I die I want to go where they go...

Offline High Noon

  • Jr. Member
  • **
  • Posts: 15
  • Total likes: 1
  • Flying Cabin Eagle
  • Eagle Type: Cabin Eagle
Re: New Machine Shop
« Reply #2 on: January 02, 2014, 01:21:38 PM »
Ah, So the Same reliable polished turds (Tirds, Terds, Trds, Tyrds........I think I got em all)! That's a relief.

So from what i understand there are more dunce caps, and Time out chairs here?.?. 
Considering that is where most of us spend our time anyhow....

Also, are we aloud to talk about Cats here???
;)

High noon
Shane
(Stirrin up more trouble)

Offline Dan_

Re: New Machine Shop
« Reply #3 on: January 02, 2014, 03:45:44 PM »
  and Time out chairs here?.?. .... Also, are we aloud to talk about Cats here??? ;)
There are no time outs, or moderation...  Everyone is on there own recognizance. 

 If you are in to torturing animals this is the wrong forum for you, and I would venture to guess any forum would be wrong for you...  

If you get too obnoxious you will most likely get a private warning.  If that doesn't do the trick, the only thing left is


If there are no dogs in Heaven, then when I die I want to go where they go...

Offline High Noon

  • Jr. Member
  • **
  • Posts: 15
  • Total likes: 1
  • Flying Cabin Eagle
  • Eagle Type: Cabin Eagle
Re: New Machine Shop
« Reply #4 on: January 03, 2014, 06:20:25 AM »
No worries Dan,

The only torturing I do, Is to harass the Geezers Here.

Oh, And I do strafe Amish buggies from time to time with my plane.

Havn't been able to find any sandbox drama tween spencer, and severance on here yet, maybe I need to dig a little more.

High Noon
SHANE

Offline bill utt

  • Beta testers
  • ***
  • Posts: 86
  • Total likes: 0
  • flown 7-5-14
  • Eagle Type: Modified DE
Re: New Machine Shop
« Reply #5 on: January 03, 2014, 07:19:09 AM »
Welcome back Young fella.
So, while you were gone some of us stated the empty weight of our A/C.
I,m interested in what yours is if you would. I think you may have said at one time it was around 600?
Jim's Genni Pod probably would not trash your ignition system. ::) 
Bill
"Any time spent off this planet, is time well invested"

 

EaglersNest Mission Statement:
To maintain the comprehensive searchable database resource for Builders and Fliers of Leonard Milholland ultralight airplane designs aka Legal Eagle Ultralights.

BetterHalfVW.com  becomes LegalEagleAirplane.com - stay in contact with Leonard and get plans for all the Milholland Designs at LegalEagleAirplane.com
SimplePortal 2.3.7 © 2008-2024, SimplePortal