How to post, how to add pics, how to add an attachment, and how to share a YouTube video...


« previous next »
Pages: [1]   Go Down

Author Topic: Landing gear  (Read 5135 times)

Offline airman

  • Full Member
  • ***
  • Posts: 33
  • Total likes: 0
  • OS:
  • Windows 7/Server 2008 R2 Windows 7/Server 2008 R2
  • Browser:
  • Mozilla compatible Mozilla compatible
  • Eagle Type: double eagle
Landing gear
« on: February 23, 2016, 04:41:06 AM »
Getting ready to start landing gear, Anyone have any tips . Also tires and brakes you used . Thanks steve
Logged

Offline Dan_

  • Staff
  • *
  • Posts: 1144
  • Total likes: 354
  • OS:
  • Windows 7/Server 2008 R2 Windows 7/Server 2008 R2
  • Browser:
  • Chrome 48.0.2564.116 Chrome 48.0.2564.116
  • Eagle Type: Legal Eagle
Re: Landing gear
« Reply #1 on: February 23, 2016, 01:19:53 PM »
Quote from: airman on February 23, 2016, 04:41:06 AM
Getting ready to start landing gear, Anyone have any tips . Also tires and brakes you used . Thanks steve

Use all thread with nuts and washer spacers to line up all four fuselage fittings on a side, while you fit and fiddle with them before tacking...
Logged


If there are no dogs in Heaven, then when I die I want to go where they go...

Offline Hugh Sistrunk

  • Black Hut Ops
  • Beta testers
  • ***
  • Posts: 139
  • Total likes: 7
  • NightEagle
  • OS:
  • Windows 7/Server 2008 R2 Windows 7/Server 2008 R2
  • Browser:
  • Firefox 44.0 Firefox 44.0
  • Eagle Type: XL
Re: Landing gear
« Reply #2 on: February 23, 2016, 10:01:38 PM »
Here are pics of the All Thread setup used by Jim Hardy - Good to get everything in line before tacking in place.  Hope it Helps.
Logged

Offline Hugh Sistrunk

  • Black Hut Ops
  • Beta testers
  • ***
  • Posts: 139
  • Total likes: 7
  • NightEagle
  • OS:
  • Windows 7/Server 2008 R2 Windows 7/Server 2008 R2
  • Browser:
  • Firefox 44.0 Firefox 44.0
  • Eagle Type: XL
Re: Landing gear
« Reply #3 on: February 23, 2016, 10:03:29 PM »
Trying the pic again
Logged

Offline Cessna4542c

  • Full Member
  • ***
  • Posts: 32
  • Total likes: 0
  • Larry
  • OS:
  • Mac OS X Mac OS X
  • Browser:
  • Safari 9.0 Safari 9.0
Re: Landing gear
« Reply #4 on: February 24, 2016, 09:12:45 AM »
http://http://www.partsforscooters.com/119-101-Front-Wheel-Assembly?sc=31&category=132883   I purchased 16 inch wheels from this website for my DE. The wheels had a rotor already installed on the wheel.  They also sell the brake caliper to go with it.  I had to change the bearings out so It would adapt to a three-quarter inch axle. The bearings were bought from USA bearings.  Wheels brake calipers and bearings all came to about $160 for the set. The wheels are rated at 200 pounds each and you can change out the tires to put balloon size tires on them.  I plan to weld a 16 inch steel disk on the outside of the wheel for strength and looks.

Larry
Logged

Offline airman

  • Full Member
  • ***
  • Posts: 33
  • Total likes: 0
  • OS:
  • Windows 7/Server 2008 R2 Windows 7/Server 2008 R2
  • Browser:
  • Mozilla compatible Mozilla compatible
  • Eagle Type: double eagle
Re: Landing gear
« Reply #5 on: February 24, 2016, 02:39:23 PM »
Thanks for the info larry   steve
Logged
Pages: [1]   Go Up
« previous next »
 
EaglersNest Mission Statement:
To maintain the comprehensive searchable database resource for Builders and Fliers of Leonard Milholland ultralight airplane designs aka Legal Eagle Ultralights.

BetterHalfVW.com  becomes LegalEagleAirplane.com - stay in contact with Leonard and get plans for all the Milholland Designs at LegalEagleAirplane.com
SimplePortal 2.3.7 © 2008-2025, SimplePortal