How to post, how to add pics, how to add an attachment, and how to share a YouTube video...


Author Topic: fabric repair  (Read 2469 times)

Offline XL-C-100

  • Full Member
  • ***
  • Posts: 67
  • Total likes: 6
  • Nate
  • OS:
  • Windows NT 6.3 Windows NT 6.3
  • Browser:
  • Chrome 49.0.2623.112 Chrome 49.0.2623.112
  • Eagle Type: LE XL
fabric repair
« on: April 19, 2016, 09:40:01 AM »
Wondering if anyone has experience with patching a cut in fabric that was sealed with latex paint? I haven't even flown yet and I put a small nick in my horizontal stabilizer :(.

Offline joecnc2006

  • Sr. Member
  • ****
  • Posts: 239
  • Total likes: 25
  • LE XL E-95
  • OS:
  • Windows 7/Server 2008 R2 Windows 7/Server 2008 R2
  • Browser:
  • Firefox 45.0 Firefox 45.0
    • Joe's CNC
Re: fabric repair
« Reply #1 on: April 19, 2016, 02:28:41 PM »
What system did you use on the covering?
You should be able to sand it down slightly to get to the sealant again depending on the system you used. Then maybe use the 3M fastbond to add a patch to the tear or rip with some pinked tape. depending on size, you should use a minimum of a 1" overlap all around.

Offline XL-C-100

  • Full Member
  • ***
  • Posts: 67
  • Total likes: 6
  • Nate
  • OS:
  • Windows NT 6.3 Windows NT 6.3
  • Browser:
  • Chrome 49.0.2623.112 Chrome 49.0.2623.112
  • Eagle Type: LE XL
Re: fabric repair
« Reply #2 on: April 20, 2016, 06:23:43 AM »
It is a small cut (less than an inch long). I used latex primer and latex paint. I was thinking I would scuff up the area around the cut then put a patch down and use latex paint to glue it on?

 

EaglersNest Mission Statement:
To maintain the comprehensive searchable database resource for Builders and Fliers of Leonard Milholland ultralight airplane designs aka Legal Eagle Ultralights.

BetterHalfVW.com  becomes LegalEagleAirplane.com - stay in contact with Leonard and get plans for all the Milholland Designs at LegalEagleAirplane.com
SimplePortal 2.3.7 © 2008-2024, SimplePortal