Thickness of the 3/4 tube of the "X" bracing if the Double Eagle landing gear

[Sylvain]

Hi Guys.
For the 3/4" tubes, I don't see the thickness specs.
Since the load is in traction and not in compression, can they they simply be made from .035?

[Kamcoman77]

On my page 12A, the "X" brace tubes connecting the landing gear fittings and the 2" x 3" joiner in the middle of the aircraft show as 5/8" x 0.049". Then on page 19 these same tubes are shown as 3/4". I think I would go with 3/4" x 0.049". That should cover any strength requirements.