How to post, how to add pics, how to add an attachment, and how to share a YouTube video...


Author Topic: Frank's XL  (Read 118733 times)

Offline PropMan

  • 2019 Donor
  • *
  • Posts: 366
  • Total likes: 66
  • XL B2
  • OS:
  • Linux Linux
  • Browser:
  • Chrome 64.0.3282.137 Chrome 64.0.3282.137
    • Performance Propellers USA
  • Eagle Type: LE XL
Re: Frank's XL
« Reply #195 on: February 27, 2018, 09:04:59 AM »
Les, the 1/2" tube is oil supply from tank to engine , the tank outlet was a little off and had the rubber hose too close to the cylinder for my comfort so I ran a soft aluminum tube with short rubber hose connected .
The springs were part of a project I picked up for materials but don't have any info on them.
Frank

Offline PropMan

  • 2019 Donor
  • *
  • Posts: 366
  • Total likes: 66
  • XL B2
  • OS:
  • Windows NT 10.0 Windows NT 10.0
  • Browser:
  • Chrome 64.0.3282.186 Chrome 64.0.3282.186
    • Performance Propellers USA
  • Eagle Type: LE XL
Re: Frank's XL
« Reply #196 on: March 05, 2018, 07:01:04 PM »
I was able to run the 3VW on a temp fuel tank and tune the carb. Instruments arent cooperating so need to work on that next. 
Frank

Offline leshoman

  • Beta testers
  • ***
  • Posts: 526
  • Total likes: 184
  • Les Homan
  • OS:
  • Mac OS X Mac OS X
  • Browser:
  • Safari 11.0 Safari 11.0
  • Eagle Type: LEU and LEXL
Re: Frank's XL
« Reply #197 on: March 05, 2018, 08:31:14 PM »
looks very smooth running and i do not see any movement when throttle is advanced. 
Les Homan

Offline Poorman2

  • 2014 Donor
  • *
  • Posts: 113
  • Total likes: 9
  • Noob
  • OS:
  • Windows NT 10.0 Windows NT 10.0
  • Browser:
  • Chrome 64.0.3282.186 Chrome 64.0.3282.186
  • Eagle Type: LE XL A5 - B40
Re: Frank's XL
« Reply #198 on: March 06, 2018, 01:57:55 AM »
It sounds good Frank! I can't waite to see it fly. I had to put mine on hold until I finnish my shop-hanger. Thanks for keeping us up to date on yours.:emoji_u1f601:

Offline Tom H

  • Beta testers
  • ***
  • Posts: 395
  • Total likes: 83
  • Built/flew LEU, built/flying DE
  • OS:
  • Windows 7/Server 2008 R2 Windows 7/Server 2008 R2
  • Browser:
  • Firefox 58.0 Firefox 58.0
  • Eagle Type: DE, LEU
Re: Frank's XL
« Reply #199 on: March 06, 2018, 04:51:45 AM »
Very nice.  You've got that thing running smooth.  Noticed only a slight shaking when running just above idle - same thing ours does.  Did you do any dynamic balancing?
Tom H
Stubby, a BDE
Treehugger, LEU

Offline PropMan

  • 2019 Donor
  • *
  • Posts: 366
  • Total likes: 66
  • XL B2
  • OS:
  • Linux Linux
  • Browser:
  • Chrome 64.0.3282.137 Chrome 64.0.3282.137
    • Performance Propellers USA
  • Eagle Type: LE XL
Re: Frank's XL
« Reply #200 on: March 06, 2018, 05:12:55 AM »
No dynamic balance,  the hi low carb adjustments make a big difference in how smooth it runs. Still have a flat spot when advancing the throttle about mid way. Need to get my instruments straightened out then I can fix that

Tom, what tach are you using? 
Mine is off considerably
Frank

Offline Tom H

  • Beta testers
  • ***
  • Posts: 395
  • Total likes: 83
  • Built/flew LEU, built/flying DE
  • OS:
  • Windows 7/Server 2008 R2 Windows 7/Server 2008 R2
  • Browser:
  • Firefox 58.0 Firefox 58.0
  • Eagle Type: DE, LEU
Re: Frank's XL
« Reply #201 on: March 07, 2018, 05:26:04 AM »
Frank, we have a TinyTach in the radial eagle right now, and it seems to work OK.  I don't know the model number, though.  It is a model that can be set for # sparks/revolution to match a range of engines.  Not too much trouble with it so far, but not too much time on it either.  Had to move the location of the sensing wire on one of the spark plug wires to reduce erratic operation.

However, I did have to try several TinyTachs on DE Stubby to get something that works.  We ended up with a TinyTach (not sure of model) on one of the ignitions, and a TTO Tach on the other ignition.  The TTO Tach worked great at first try - no fiddling around with the sense wire location, smooth display.  As for accuracy, seems correct, agrees with the TinyTach, but have not verified with optical tach or other types.

I have a TinyTach clone in the shop that my son gave me.  He bought a hand-full of them for his lawn cutting equipment, probably a few bucks each, and gave me one.  I have not tried it, but he said they work fine.  I believe others on the Nest may have tried clones, too.

From my experiences, I'd recommend Trail Tech TTO, if you want a digital readout.

I found my write-up from May 2012 on tachs in the old Yahoo groups.  Hope I'm not overly hijacking this thread with it though.  Following in italics is from the old Yahoo group:

Here is an update on our quest for a working tachometer for our DE, and some other related "good" ideas:
 
In the email attached below this one is a description of the Tiny Tachs that we have and tried.
 
Update on the Tiny Tach TT4RX, "Tiny-Tach 4C reset w/ filter" - This is an older version, calibrated for one spark per 2 revolutions, and not adjustable.  After it locked up, I was able to reset it to operation by peeling off the front cover, digging out some rubber, and shorting the terminals.  I think these units lock up if there is too much signal.  Our DE has dual ignition, primary is distributor ignition, secondary is magneto.  We had run our Tiny Tach wire alongside the magneto on/off switch wiring, and I think it may have been overcome with the signal noise from magneto.  As part of the effort, I found someone on the web that ran his TT wire through the grounding braid of a piece of coax that he had removed the inner conductor and its insulator from.  A lot of coax is too tightly constructed to allow this, but I had a piece that I was able to do it.  I worked the TT wire through it.  The TT wire is itself a coax; its inner wire is wrapped around the spark plug wire, and the shield is connected to a ground at the engine.  On the added, outer coax I insulated the engine end, but grounded the panel end of the coax.  Also, I routed the coax away from the magneto wiring.
 
This all seemed to work, and work well, too.  Problem is, this TT model accumulates total time in whole hours.  Not hours/minutes, or hours/tenths of hour.  We wanted to see better accumulated time resolution than whole hours.


A couple of extra tidbits of this older model.  There is a reset button, and it will reset the accumulated time back to zero.  I had made a plastic cover to protect the button to prevent accidental time reset.  I also found that a run signal can be faked into these OLDER models.  Connect the ground wire and the signal wire of the TT to the secondary of a 12 volt, AC transformer (not a DC power supply, has to be AC).  I used this technique to build the run time back up to match our engine run time. 
 
Kiblinger and Spencer came up with a TTO tachometer.  I ordered one and tried it out.  It worked great.  No wandering, steady updates, no lock-up.  It shows accumulated time in hours/tenths of hour, non-resettable.  Immediately after shutting engine down, it shows the max rpm for maybe 10 seconds, then shows the accumulated hours.  It is smaller than the Tiny Tachs, but the display is about the same size.  It has a setting button on the back surface, and can be set for # pulses/crank rotation, fast/slow updates and for high/low sensitivity.  The wire is not a coax, and it does not require a ground connection at the engine, just some wraps around the spark plug wire.  I did take care to route the wire away from the mag wiring, because it could possibly be confused with all that electrical noise.  I like it.  It is a "Trail Tech TTO Tach/Hour Meter 72-A00", ordered from PowerSportSuperStore.com, and it cost $29.65 total.  There are sources a few cents cheaper, but I had purchased from this place previously, so went with them.


Only problem, it had zero time on it, and I wanted it to match the engine time.  During my testing of Tiny Tachs, I found that the newer, settable versions could not be fooled to operate with the 12 VAC transformer trick.  I figured that these newer tachs sense a signal that has a faster transition time than 60 hz.  I had a switching power supply from an old TV digital converter, and thought that there may be some fast transition signal available in there, so I opened it up and tested it with one of the newer model TTs.  Just to be sure not to get any higher DC voltage in the TT, I put a 100 pf capacitor in series with the signal lead, and began touching points of the power supply circuit board.  I found a spot that tricked the TT to operate at about 15,000 rpm and it started accumulating time (Didn't have to connect the ground wire to anything to make the tach work, so I simply connected the ground wire of the TT to the metal work bench (yeah, I know, electricity on a metal bench).  I connected a house light timer to it and set in a dozen hours and let it run.  Next day the TT had the right amount of hours on it.  Problem solved.
 
I tried the same trick on the TTO and it worked, although there is no ground wire to connect to the bench.  So, I was able to set the TTO with the correct engine hours.  We put it in the airplane and have a couple add'l hours on it.
 
The switching power supply is a wall wart, 120vac input, 5 vdc output, 1.72 amps.  I can't guarantee that any other PS will work; may have gotten lucky with this one.  I think what is happening here is that the switching power supply converts 60 hz to maybe a couple thousand hz in the process of making the DC in the output.  I suppose the tachs sense this higher frequency as a spark signal.
 

A previous method I used was to connect a neon transformer (120vac input, approx 5,000 vac output) to a spark plug with spark plug wire, and wrap the TT signal wire around the spark plug wire.  This worked great, but I did not like running the sparking plug unattended for a dozen hours, and it was somewhat cumbersome.
 
The newer TTs, even with the wire run away from the mag wiring, did not operate as smoothly as the TTO.  I still think that the newer TTs can work well in some applications, but may be more sensitive to extraneous electrical noise, causing the display to constantly fluctuate.  Maybe the added outer coax would work.  But, I probably won't be messing any more with them soon.  Gonna try to do some flying.
 
Tom Hubbuch
LEU and DE Stubby

From: tom hubbuch <hthomw@...>
Subject: Re: [DEr's read Msg15985] Tiny Tach
To: EaglersNests@yahoogroups.com
Date: Wednesday, March 21, 2012, 8:23 AM


On our DE, we have a tiny-tach TT2A-O, which we rec'd last Dec.  It is a bit erratic on the plane, but I think that is a problem of finding the right spot on the plug or coil wires and the right number of wraps to get a steady signal.
 
At least I hope so.  This is the third one we've tried.  The first was part #TT2A, description "Tiny-tach adjustable firing mode".  The package card was marked "2A Adjustable".  This unit locked up on the plane.  Steve at Tiny-tach told me how to reset it by peeling off the front cover, and digging out the rubber to the right of the switch botton, then shorting out two traces on the circuit board.  I think what this does is short the internal battery momentarily, allowing the unit to re-start.  We tried to make this unit work, but it kept locking up.
 
Steve then sent us an older, non-adjustable model, shown as part #TT4RX, description of "Tiny-Tach 4C reset w/ filter".  On the back was written "4RX".  The package was marked "TT226R-4cx".  This unit also locked up on the airplane.
 
Then we got the current unit, part #TT2AO", description "Tiny-Tach RPM/HOUR Meter - Adjustable/Filtered".  The package card was marked "2AO".  On the back of the unit was printed "411TT2A", followed by hand-written "10".
 
We have a Tiny-tach on the LEU, older non-adjustable model, and it worked great.  So, we are optimistic that we can get this latest unit working well.
 
Tom Hubbuch
LE and DE Stubby in Louisville

--- On Tue, 3/20/12, rockiedog2 <rockiedog2@...> wrote:


From: rockiedog2 <rockiedog2@...>
Subject: [DEr's read Msg15985] Tiny Tach
To: EaglersNests@yahoogroups.com
Date: Tuesday, March 20, 2012, 3:16 PM

Hey Sam
I just talked to Steve at Tiny Tach. What is the model # you're running? TT2A M? Did it come with a coax lead and you have to strip the cover back and solder a pigtail on the end to wrap around the plug wire?
$47.00? That's diff than the one I had...just cut the lead to length and wrap it around the plug wire. Lasted 141 hours. I don't want another one of those. Believe it was a TT2A
Tom H
Stubby, a BDE
Treehugger, LEU

Offline PropMan

  • 2019 Donor
  • *
  • Posts: 366
  • Total likes: 66
  • XL B2
  • OS:
  • Linux Linux
  • Browser:
  • Chrome 65.0.3325.109 Chrome 65.0.3325.109
    • Performance Propellers USA
  • Eagle Type: LE XL
Re: Frank's XL
« Reply #202 on: March 24, 2018, 02:29:25 PM »
Covered, painted, and installed the tail group!
Just need to connect the controls.

Wings are next, then time for test operations .
Frank

Offline PropMan

  • 2019 Donor
  • *
  • Posts: 366
  • Total likes: 66
  • XL B2
  • OS:
  • Linux Linux
  • Browser:
  • Chrome 66.0.3359.158 Chrome 66.0.3359.158
    • Performance Propellers USA
  • Eagle Type: LE XL
Re: Frank's XL
« Reply #203 on: May 15, 2018, 05:45:43 PM »
More progress with fabric. One wing and both ailerons covered, waiting on fabric to finish. Seeing the light at the end of the tunnel
Frank

Offline LSaupe

  • Full Member
  • ***
  • Posts: 27
  • Total likes: 1
  • New Member
  • OS:
  • Windows NT 10.0 Windows NT 10.0
  • Browser:
  • Chrome 63.0.3239.132 Chrome 63.0.3239.132
  • Eagle Type: XL
Re: Frank's XL
« Reply #204 on: May 16, 2018, 02:48:32 AM »
So... does the whiskey help smooth out the fabric..., or just make the builder happier with the end product regardless of how it goes?:emoji_u1f600:

Nice looking bird.  Can't wait to hear the flight review.

Offline PropMan

  • 2019 Donor
  • *
  • Posts: 366
  • Total likes: 66
  • XL B2
  • OS:
  • Linux Linux
  • Browser:
  • Chrome 66.0.3359.158 Chrome 66.0.3359.158
    • Performance Propellers USA
  • Eagle Type: LE XL
Re: Frank's XL
« Reply #205 on: May 16, 2018, 08:55:43 AM »
:emoji_u1f60e: Yes
Frank

Offline scottiniowa

  • Hero Member
  • *****
  • Posts: 497
  • Total likes: 99
  • Scott-In-Iowa
  • OS:
  • Windows 7/Server 2008 R2 Windows 7/Server 2008 R2
  • Browser:
  • Chrome 66.0.3359.139 Chrome 66.0.3359.139
    • Display of helpful hits and tricks
  • Eagle Type: Legal E- XL
Re: Frank's XL
« Reply #206 on: May 16, 2018, 08:57:07 AM »
Looking darn good Frank! :emoji_u1f60e:
best email address:  irondesignairparts@gmail.com

Offline Flyguyeddy

  • Full Member
  • ***
  • Posts: 160
  • Total likes: 15
  • New Member
  • OS:
  • Mac OS X Mac OS X
  • Browser:
  • Safari 0.8.2 Safari 0.8.2
Re: Frank's XL
« Reply #207 on: May 16, 2018, 09:34:31 AM »
Frank, whats the TBO on that engine and how easy are parts to come by?   Is there a bunch of vw parts on it? 

Offline PropMan

  • 2019 Donor
  • *
  • Posts: 366
  • Total likes: 66
  • XL B2
  • OS:
  • Linux Linux
  • Browser:
  • Chrome 66.0.3359.158 Chrome 66.0.3359.158
    • Performance Propellers USA
  • Eagle Type: LE XL
Re: Frank's XL
« Reply #208 on: May 17, 2018, 06:30:38 AM »
Currently the 3V tbo is 600 hours. We feel that will be extended once more time is on the engines. Like any other engine the more you use it the longer it last. 
No, not any VW parts in it. It started that way, withe cylinders and pistons,  but Verner makes most all the parts now. Cylinder heads are commercially available .
Frank

Offline Flyguyeddy

  • Full Member
  • ***
  • Posts: 160
  • Total likes: 15
  • New Member
  • OS:
  • Mac OS X Mac OS X
  • Browser:
  • Safari 0.8.2 Safari 0.8.2
Re: Frank's XL
« Reply #209 on: May 17, 2018, 11:31:01 AM »
Commercially available?   From who?

 

EaglersNest Mission Statement:
To maintain the comprehensive searchable database resource for Builders and Fliers of Leonard Milholland ultralight airplane designs aka Legal Eagle Ultralights.

BetterHalfVW.com  becomes LegalEagleAirplane.com - stay in contact with Leonard and get plans for all the Milholland Designs at LegalEagleAirplane.com
SimplePortal 2.3.7 © 2008-2024, SimplePortal